Tyre Technical Symbols
Stands for Advanced-Variable Belt Density technology, specifically for rear tyres. This is a jointless belt of ultra-strong Steel or Aramid strands running around the tyre's circumference. At the centre of the tread the strands are very closely spaced for maximum stability and high wear resistance. The closer you get to the edge of the tread, the further apart the strands are spaced – this broadens the tyre's footprint when you're getting your knee down.
Reactive Footprint technology marries Avon's unique variable belt density A-VBD carcass with Lifetime Profile Engineering (LPE) to produce a footprint which changes size and shape depending on the bike's lean angle for the full life of the tyre. The result is a contact patch that grows as the bike leans, giving long life when travelling in a straight line and more grip in corners.
'Spiral and Belted Carcass'. A high level of grip puts high loads through the tyre's carcass; the SBC System features ultra-tough belts underneath the Aramid or Steel strands of A-VBD to cope with the extreme stresses.
ATAC Tread Profile
Advanced Tread Arc Combination, or Tri Arc, varies the tread profile across the tyre for the ultimate in handling and stability however far over your bike is. Works in tandem with A-VBD.
New 'high dispersibility' silica formulation. Silica-HD compounds have rapid 'warm up' times giving maximum grip in the wet and dry.
SRS-Compound (Super Rich Silica-Compound)
Compounds formulated with large amounts of silica offer enhanced grip in wet and cold conditions. This produces extra grip when the tyre is cold but also reduces excessive heat build up which can affect mileage.
Compounds optimised for track performance.
Initials that stand for 'Enhanced Aqua Flow'. In other words, tread patterns to efficiently and rapidly clear water away from under your tyres.
Enhanced Stability System - The carcass, sidewall and tread pattern are designed to work together to reduce localised flexing within the tyre's contact patch. This increases grip and stability while at the same time reduces tyre wear.
IFG(Inverted Front Grooves)
For the front tyre, a system pioneered by Avon in the late eighties and only now being adopted by the competition, resists 'stepped-wear' and cupping to deliver smooth handling throughout the tyre's life. By significantly reducing uneven tread wear, a further advantage of the IFG configuration is improved wet braking and shorter stopping distances.
LPE(Lifetime Profile Engineering)
This works in conjunction with ATAC to produce a tyre profile and footprint which even when worn, gives consistent handling and stability for the full life of the tyre.