Lotus on Track

The information below is for Lotus on Track championships running Avon Motorsport tyres. If you need any further details or have any questions please email avonmotorsport@coopertire.com

Elise Trophy UK
For standard and slightly modified Elise S1 and S2 (Rover engines), S2 Exige and 111R

Lotus Cup UK Production Class
Group - Production For standard and slightly modified Elise S1 and S2 (Rover engines), S2 Exige and 111R

Lotus Cup UK Supersport Class
Group - 2-Eleven For standard and slightly modified 2-Eleven cars
Group - Exige Cup For Exige S2 Cup cars and S2 Exige variants
Group - Lotus Open For Elise S, Elise S1, Elise S2, Exige S1, 340R & Europa
Group - V6 Cup For standard specification Evora and V6 Exige race cars

We strongly recommend all competitors to 'scrub' new tyres in. This helps increase a tyre life and also its consistency over long runs. More information on Avons Scrubbing in procedure.

Minimum cold starting pressure: 22psi (This is the pressure the tyre is set to prior to a session/ heat cycle). Running any lower than this could potentially damage the tyres sidewall construction. Avon Motorsport does not recommend specific starting pressures. This is due to the variables involved (i.e. track conditions, track and ambient temperatures, circuit layout, session length, driving characteristics).

Target hot pressure: 30psi (This is the optimum pressure for the tyre to be run at whilst at operating temperature). To obtain this target hot pressure there may be a requirement to start each tyre at different cold starting pressures; this is due to each tyre inevitably working at different levels. The cold starting pressure required to achieve the target hot pressure will depend on the variables stated above.

To purchase ZZR's please contact Avon Motorsport direct or BMTR

If you have any question then please contact us - Avonmotorsport@coopertire.com